|
|
|||||||
Attention: Last reply in this thread was more than 16 Years ago |
|
|
Thread Tools |
|
#1
03-19-2008, 10:26 PM
|
|||
|
|||
Blank page and I think I've tried everything
Okay,
I've uninstalled, re-installed twice, to no avail. This is on VB 3.6.8 L2 just FYI. Things I've done and/or tried. *I have the path set exactly like the whatismypath.php showed (see attached screenshot). *I've set permissions to 777 on the photoplog directory (and even went as far as doing all subdirectories and files inside too) *I double-checked and the forum is not running in safe mode *The photoplog is turned on. *Usergroup permissions were checked *Files re-uploaded in case something dropped on initial upload. *Reversed the slashes just to see if it made a difference...it did not. What else should I try? Thanks for any help!!!  
|
|
#2
03-19-2008, 10:43 PM
|
||||
|
||||
|
Sometimes the needed answers are hidden in this forum. Do a search and you'll find the answers you need. Such like...
- Blank page on upload => See Morgan's Post #2 - Install Issue- Please Help => See Morgan's Post #2 And the most important: Blank Page or Warning: chdir() or Warning: main() - Why? Hope that helps
|
|
#3
03-19-2008, 11:05 PM
|
|||
|
|||
|
Yeah, well...I searched previous to this...here and vbulletin.org and I've tried everything that I found.
|
|
#4
03-20-2008, 12:17 AM
|
||||
|
||||
|
Try the following path in the PhotoPlog config file:
Code:
Content visible to registered users only.
__________________
Please use the forums for support, feature requests, and similar such things. Support does not include custom code, custom template edits, or third-party modifications. PMs and emails to me should be for private information only, such as login information. If you PM or email me a support question, chances are good that I'll ignore it.  Thanks. While the work or play is on, it is a lot of fun if while you are doing one you don't constantly feel that you ought to be doing the other. -- Franklin Pierce Adams
|
|
#5
03-20-2008, 03:53 PM
|
|||
|
|||
|
Ok, thanks!!! I'll report back.
|
|
#6
03-20-2008, 07:40 PM
|
|||
|
|||
|
Wow! I've tried all of these with the same results:
Code:
Content visible to registered users only. Last edited by phyc; 03-20-2008 at 07:42 PM..
|
|
#7
03-21-2008, 01:47 AM
|
||||
|
||||
|
How about this:
Code:
Content visible to registered users only.
__________________
Please use the forums for support, feature requests, and similar such things. Support does not include custom code, custom template edits, or third-party modifications. PMs and emails to me should be for private information only, such as login information. If you PM or email me a support question, chances are good that I'll ignore it. Thanks. While the work or play is on, it is a lot of fun if while you are doing one you don't constantly feel that you ought to be doing the other. -- Franklin Pierce Adams
|
|
#8
03-24-2008, 04:04 PM
|
|||
|
|||
|
Oh I could shoot myself. I was using a php editor and it was NOT overwriting like I thought it was. It was the second one of the many I tried above. It's now loading.
Thank you for the help, and my sincere apologies for my error!!! I should have double-checked that! Off to test it out! Thanks again!!!
|
|
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blank page on upload. | lordtopcat | Troubleshooting & Problems | 6 | 03-09-2008 05:51 PM |
| Blank page | Bashy | Troubleshooting & Problems | 23 | 05-06-2007 08:45 PM |
| Blank Page... | Zacarias | Troubleshooting & Problems | 21 | 03-05-2006 03:24 PM |
